
Huge Fat Bass |
| Since their launch Acme Low B cabinets have been redefining the
meaning of bass for players across the globe. Bass players can now
feel the lowest notes that their bass instrument can produce. |
Revolutionary Design |
| Their groundbreaking 3-way design allows the use of a unique 10"
bass driver which can produce unprecedented levels of undistorted
low frequencies. |
Flat Frequency Response |
| No conventional 2-way speaker can approach this level of sonic
accuracy, where crystal clear highs are melded with true undistorted
mids and immense hard hitting bass. |
The products are detailed below, from the smallest 1x10" B-1 to
the compact but powerful 4x10" B-4. We are now selling the improved
Series II range.
Those wishing to bring the bass weight of an Acme system to their conventional
rig can now choose the B-2W and B-4W models. These cabinets do not contain
the high frequency and midrange drivers or crossover found in the full-range
variants, otherwise they are identical. They have a similar effect to
other manufacturers' 15" and 18" units, except with a superior
transient response.
The Low B-1
The
same incredible frequency response as the big Low B-4 - in a box a third
the size and weight!
Ideal for smaller gigs, particularly where 'Hi-Fi' sound quality is paramount.
The best sounding and smallest cab available for upright bass or acoustic
bass guitar applications
A pair will handle much bigger gigs. Stack them to make a huge sounding
yet tiny rig. Run them in stereo as an excellent, lightweight, compact
PA system.
| Specifications - |
| Model: |
Acme Low B-1 Series II |
| Frequency response: |
+/-3 dB 41Hz to 22 kHz -6 dB at 31 Hz |
| Power Handling: |
175 Watts RMS continuous |
| |
150 Watts sine wave @ 30.87 Hz |
| Sensitivity: |
90 dB 1W/1M |
| Impedance: |
Available in 4 or 8 ohms |
| Dimensions: |
15.75"H x 15.75"W x 13.5"D |
| Weight: |
31 lbs. / 14.1 Kg |
The Low B-2
A
very compact cabinet with the bass extension of a good 18" subwoofer.
Amazing transient response; from the fundamental of the open B-string,
right up to the highest harmonics of a C or F-string.
Loud enough for a single cabinet to hold its own against most drummers.
High power handling. 350W RMS is a good starting point due to the relatively
low efficiency of the cabinet. 500W RMS is ideal.
The more power, the
better the sound. (Within reason - It's only a 2x10"!)
Use it with an upright bass for loud jazz gigs and be rewarded with true
acoustic tone.
A pair makes a very loud, versatile and compact rig. Stack them end on
end for amazing dispersion and clarity or side by side for enormous kick.
Use them as a high quality PA. For those occasions where true bass response
is paramount, monitor your recordings with them. They really are that
'HiFi'! And the entire rig will still fit on the back seat of your compact
hatch.
| Specifications - |
| Model: |
Acme Low B-2 Series II |
| Frequency response: |
+/-3 dB 41Hz to 22 kHz -6 dB at 31 Hz |
| Power Handling: |
350 Watts RMS continuous |
| |
300 Watts sine wave @ 30.87 Hz |
| Sensitivity: |
93 dB 1W/1M |
| Impedance: |
Available in 4 or 8 ohms |
| Dimensions: |
23"H x 15.75"W x 16.5"D |
| Weight: |
50 lbs / 23.2 kg |
The Low B-4
A
loud, yet light and relatively compact cabinet able to produce massive
sound pressure levels particularly at very low frequencies.
Incredible transient response across the whole frequency spectrum: when
you slap a note, the woofers will thump, the midrange bark and the tweeter
ping -and all at the same time! No conventional rig with large bass drivers
can achieve this.
Bass depth and weight on a par with a good 18" but with much quicker
response = more slam.
Massive power handling and comfortable with power amplifiers rated at
up to 1000W RMS. The more amplifier power you can provide the better the
sound.
A pair of cabinets will handle almost any gig with ease. Place side by
side for maximum thump or stack them for better projection and clarity.
| Specifications - |
| Model: |
Acme Low B-4 Series II |
| Frequency response: |
+/-3 dB 41Hz to 22 kHz -6 dB at 31 Hz |
| Power Handling: |
700 Watts RMS continuous |
| |
600 Watts sine wave @ 30.87 Hz |
| Sensitivity: |
96 dB 1W/1M |
| Impedance: |
Available in 4 or 8 ohms |
| Dimensions: |
26.5"H x 23"W x 16.5"D |
| Weight: |
78 lbs. / 35.4 Kg |
|